How to price your COMIND® pass-through heater?
To quote your COMIND® pass-through heater, you must provide your dealer with the power and voltage of the heater, what it will be used for, the time it takes to heat the solution, provide general measurements, and the dimensions of the inlets and outlets.
COMIND® pass-through heaters consist of a carbon steel or stainless steel chamber, inside which a flange or thread type resistance is mounted, which allows the temperature of a liquid or gas to be increased only for the time it is heated. It takes a long time to pass through the heater, with an inlet and outlet chamber that allows the flow of whatever you want to heat to pass through. It allows the thinning of high density oils to allow an easy flow through a pump, heating oil (for example oil), increasing the temperature of different gases or air, heating water to be stored in reserve tanks, heat transfer, wash and rinses associated with different detergents. Therefore, it is very important to consider the viscosity of the fluid you want to heat at the time of purchase. COMIND® pass-through heaters have a moisture-resistant or anti-explosive terminal box for extreme environments, which will allow you to regulate the minimum and maximum temperature that you want to reach in your process.
Insulation is often required for containers in order to preserve the heat that is applied within the container. Thermocouple probes can be used with electric immersion heaters to keep oil or water at desired temperatures.
Within the national industries that use this type of heating, there are oil and gas companies specifically that use pass-through heaters that help in the process of modifying the viscosity of the oils they heat. This allows heat to be generated within a single enclosure or solution, thus achieving full efficiency.
The benefits of using our COMIND® pass-through heaters are that they are easy to install, compact, durable, very energy efficient, designed at the customer’s request, reducing heat loss from the container, among others
|Power and voltage||According to customer's requirement|
|Terminal connection box||For general purposes or anti-explosive systems|
|Chamber material||Carbon steel or stainless steel|
|Thermal insulation||Mineral wool or ceramic fiber|
|Temperature controls||Thermostat of different graduations|
|Electric systems||Contactors or solid state relay|
|Flange measurement||3 ”, 4”, 5 ”, 6”, 8 ”, 10”, 12 ”and 14” or as required (150lb or 300lb)|
|Thermal transfer of oils||Mainly used for molds or platforms that require an heat transfer to a specific product|
|Heating of oils||Mainly used for the preheating of oils, which are supplied to their respective burners.|
|Water||Heating of water to be stored in reserve tanks for the application of various industrial processes, washing systems and associated rinsing different detergents|
|Air, gases||Temperature rise of different types of gases or air|
|Other||Thin very dense oil so it can flow easily through a pump|