HEAT TRACE Autorregulable
Select your product
The Explosion Proof Power Presence Indicator is used for the bi-directional connection of the self-regulating heating tape . It can be used in ordinary and dangerous areas.
FJHL power presence indicator
Explosion- proof three-way box is used for self-regulating heating wire three-way connection , it can be used in normal or hazardous area. Use in piping
Splice kit (3-way)
Explosion proof. It is used for the connection of the power cable and the electric heating cable in normal and explosion areas.
FDHL connection box
This model is used for mineral insulated cable connection to secure circuit connections.
Junction box for MI cable
It is for use as a control input for heat tracing electrical circuits that require temperature sensing on the pipe or tank wall. It can be supplied with a transmitter in 4-20 ma.
RTD-100
This type of box allows the temperature of the heating cable to be limited by means of a regular thermostat. This product can be used outdoors, ordinary and dangerous areas .
MoJunction box with thermostat BJW-51
This box allows the user to install the connection points with ease. Includes RS-T + N terminal blocks
PCBT junction box
Digital programming thermostat with LCD touch screen. It is recommended to control the electric heating device. Volt: 220/230 V Setting range: 5 ~ 90 ° C (can adapt to 35-90 ° c)
Electronic radiant floor thermostat
HEAT TRACE PARALLEL
Heating Tape Connection
Junction box with thermostat BJW-51
This type of box allows
the temperature of the heating cable to be limited by means
of a regular thermostat.
This product can be used outdoors,
ordinary and dangerous areas .
Splice Kit (3-way)
Explosion- proof three-way box is used for self-regulating
heating wire three-way connection
, it can be used in
normal or hazardous area. Use in piping.
FJHL Power Presence Indicator
The Explosion Proof Power Presence Indicator
is used for the
bi-directional connection of the self-regulating heating tape.
It can be used in ordinary and dangerous areas.
RTD-100
It is for use as a control input
for heat tracing electrical circuits
that require temperature sensing on the pipe or tank wall.
It can be supplied with a transmitter in 4-20 ma.
Kit de Sello final