Heating Pipe Elbows in Process Lines with Custom Heating Jackets

Applications June 25, 2025 3 min read
Heating Pipe Elbows in Process Lines with Custom Heating Jackets

One of the main challenges in heated piping systems is heat loss at the elbows of process pipes. Because of their geometry and greater exposure, these curved sections cool down quickly, creating cold spots that affect the temperature of the fluid and cause blockages, condensation or product crystallization.

Comind was contacted by a food processing plant that suffered frequent blockages in the stainless steel elbows of its liquid additive transfer line. The conventional heat tracing system could not effectively cover these bends, causing significant temperature drops and affecting operational continuity.

Custom heating jackets installed on pipe elbows

Thermal diagnosis and field analysis

The technical inspection found a difference of up to 20 °C between the heated straight sections and the elbows, where there was no effective heating. This gap created build-up points and required periodic corrective work, increasing operating costs.

The solution: custom heating jackets with built-in insulation

To solve the problem, Comind designed and installed a custom heating system based on:

  • Custom heating jackets with integrated electric heating cables, shaped to fit each elbow. They deliver even heat and, at the same time, act as thermal insulation, protecting the system from the outside environment.
  • PT100 sensors placed directly on the metal surface for real-time temperature monitoring.
  • Programmable digital controllers, set to hold a constant temperature according to process requirements.
  • Safety fasteners that allow the jackets to be removed for inspection or maintenance without dismantling the pipe.

The solution was applied to 24 three-inch elbows in areas exposed to the weather, ensuring thermal continuity across the entire piping network.

Results

The implementation delivered immediate technical and operational improvements:

  • Stable temperature of +45 °C at all elbows.
  • Cold spots and product build-up in the bends eliminated.
  • 18% energy savings, by no longer overpowering the straight sections to compensate for losses.
  • 50% less time spent on maintenance and corrective cleaning.
  • 12 months of continuous operation without failures or thermal interruptions.

Heat tracing of pipe elbows

Conclusion: efficient heat tracing includes the elbows

In many industrial facilities, pipe elbows are overlooked in thermal design. However, their impact on process efficiency and product quality can be critical.

At Comind we manufacture and integrate complete, custom thermal solutions for every point in the system: pipes, valves, flanges, elbows, tanks and equipment. Our engineering combines electric heating cables, custom heating jackets and control systems to ensure optimal thermal performance, with in-house manufacturing and specialized technical support.

Do you have a thermal challenge at your plant?

Our team is ready to help you develop a specific solution for your process, materials and operating conditions. Contact us for personalized advice on your project.

Share Link copied!