$101.014 + VAT
The TxIsoPack – USB is an isolated two-wire 4-20 mA temperature transmitter for head mounting. Powered by the current loop, it is configured by connecting the transmitter directly to the PC’s USB interface, with no additional driver installation required.
The TxIsoPack – USB is an isolated two-wire 4-20 mA temperature transmitter for head mounting. Powered by the current loop, it is configured by connecting the transmitter directly to the PC’s USB interface, without requiring any additional driver.
The output current represents the signal applied to the transmitter input, linearized according to the configured input type.
Pt100: types: 2, 3 and 4 wires, 0.17 mA excitation, = 0.00385, per NBR 13773 (IEC 751)
Voltage: 0 a 50 mVcc. Impedancia> 1 MΩ
TOTAL ACCURACY: maximum error 0.3% of full range for thermocouples; 0.2% of full range for Pt100 and voltage
RESPONSE TIME: ≤500 ms
ISOLATION: 1000 VAC for 1 minute between input and output
OUTPUT: 4-20 mA or 20-4 mA current, 2-wire; linear to the temperature measured by the selected sensor
OUTPUT RESOLUTION: 0.004 mA (12 bits)
POWER SUPPLY: 12 to 35 VDC, voltage across the transmitter
MAXIMUM SERIES LOAD: RL = (Vcc – 12) / 0.02 Ω where Vcc is the supply voltage
OPERATING TEMPERATURE: -20 to 75 °C
AMBIENT HUMIDITY: 0 to 90% RH
ELECTROMAGNETIC COMPATIBILITY: EN 50081-2, EN 50082-2
Internal protection against reverse supply voltage polarity
Internal cold-junction compensation for thermocouples
ABS housing, 44 mm diameter and maximum height of 24 mm
5-pin mini-B USB connection cable
| Output | 4-20 mA |
|---|---|
| Mounting | Head mount |
Temperature
Temperature
Temperature
Temperature