Quote on request
– Display: 4-digit red LED display
– Indication range: -1999 to 9999 or 9999 to -1999
– Configuration: keys with tactile feedback
– Accuracy: 0.1 % of span ± 1 digit
– Reading rate: 10 readings/s
– Data backup: non-volatile EEPROM memory
– Thermal coefficient: 0.005 % / °C of range
– Advanced functions:
Increasing or decreasing indication
Alarm indication
Password-protected configuration
– Electrical connection: EN 175301-803 A standard (DIN 43650 type A)
– Power supply: powered by the 4-20 mA loop
– Maximum loop current: 60 mA
– Voltage drop:
Below 10 mA: < 5.4 V
10 to 12 mA: < 3.9 V
Above 12 mA: < 2.8 V
– Operating conditions: -40 to 85 °C
– Dimensions: 42.5 x 52.5 x 40.7 mm
– Housing material: ABS (polyurethane gasket)
– Protection rating: IP65, NEMA4X
– Certifications: CE, RoHS
– Warranty: 3 years
The LoopView is a 2-wire 4-20 mA current loop indicator, self-powered by the loop with low consumption. Its high accuracy lets it display a wide range of sensor variables such as pressure, differential pressure, flow, pH, temperature, acceleration and others. It has male and female EN 175301-803 (formerly DIN 43650 type A) valve-style connectors.
The LoopView is powered by the current loop itself and can be inserted into existing sensors in industrial installations that use the same connector model.
The device has a 4-digit display and 2 keys, allowing the user to quickly and easily set the indication value and range, add a decimal point, apply a digital filter and adjust calibration.
Parameter settings are password-protected and are made directly on the indicator using the panel keys. Configured parameters are stored in non-volatile memory: they are not lost if the current loop is interrupted.
| Type | Current indicator |
|---|
