$578.169 + VAT
Dimensions: Length/243 mm Width/142 mm Height/154 mm
Amperes: 50A
Supply voltage: 440 VAC, ± 10%
Auxiliary voltage: 220 VAC, ± 10%, 50/60 Hz
Operating frequency: 50/60 Hz
Output type: Selectable phase angle or zero cross
Phase input control signal: 4-20 mA, 0-5 V, 1-5 V, 0-10 V or 2-10 V
Soft start: 0 or 8 seconds
Operating mode: Auto via analog signal or manual via potentiometer
Output voltage range: 0 ~ 100 %
Operating environment: – 10 °C to 50 °C and humidity below 90% RH
Insulation resistance: Over 20 MΩ (power supply and outer cover)
Over 20 MΩ (input signal and outer cover)
Isolation 2500 VAC/1 min between power supply and outer cover
1000 VAC/1 min between power supply and input signal
It operates on SCRs (thyristors). One of its most common applications is temperature control of electric heaters through power regulation, using a digital process controller with a 4–20 mA control output and a thyristor power regulation system (TPR). With these components you can achieve proportional control of heater power through the voltage modulation the system performs. This system can also be applied to ON-OFF control through a relay output on a temperature controller. Thyristor power regulation systems have three-phase and single-phase applications, for both resistive loads (electric heaters) and inductive loads (motors)
| Current | 50 A |
|---|
TPR thyristor controllersTPR thyristor controllersTPR thyristor controllersTPR thyristor controllers